Epson EL 486UC+ User Manual page 100

Serial number:
System BIOS version:
System
configuration:
Windows version:
Software versions:
MS-DOS version:
CONFIG.SYS:
AUTOEXEC.BAT:
6-2
Troubleshooting
Look on the back panel of the
computer to find the serial number.
Restart your system. You'll see the
system BIOS version number on
the screen when your system
performs power-on diagnostics.
Start SETUP and select the System
Summary option to see your
system 's configuration.
When your computer has loaded
Windows, select Help from the
menu bar. Then select About
Program Manager to see the
version number.
In Windows applications, select
About from the Help menu, or
read the version number from the
banner screen displayed when the
program starts, or check your
software manual.
At the MS-DOS prompt, type
Enter
and press
version number.
At the MS-DOS prompt, type
: \
TYPE C CONFIG
Enter
to see a listing of your system
configuration commands.
At the MS-DOS prompt, type
TYPE C:\AUTOEXEC.BAT and
press
Enter
to see a listing of your
system startup commands.
VER
to see the MS-DOS
. and press
SYS