Changing The Country Code - Epson EISA EISA Desktop Manual Manual

Changing the Country Code

If you need to change the country code for your system's
keyboard driver and configuration information, you can run
the CHGCTR utility. Follow these steps:
1. Insert the Reference 1 diskette in drive A and log onto
drive A.
2. At the A> prompt, type
information screen for the Change Country Code utility
followed by this prompt:
Change country code? (Y/N)
3. If you want to keep the current country code, press IN).
You see a message telling you that the program still must
update your files. Then the program copies the files. Go to
step 4.
If you want to select another country code, press [VI. You see
a list of the function keys to press to select a different code.
Press the appropriate function key for the country code you
want. The program copies the files and displays a message
confirming the change.
4. When you see the following message, press any key to reboot
the system and run the System Configuration program:
Now you should reboot the
the appropriate AUTOEXEC.BAT and
CONFIG.SYS files and start the System
Configuration program.
Press any key to reboot . . .
After a moment, you see the System Configuration title
screen. If you want to run that program now, see Chapter 2
for instructions.
Setting Up Your System
l-10
and press [Enter. You see the
CHGCTR
to run
system