Table of Contents
Advertisement
When the list is correct, you can run diagnostic tests on each
device. If you do not want to test a device, you can remove
it from the list. You can also add a device to the list.
Deleting Tests
To remove devices from the Items Detected list so the System
diagnostics program cannot test them, follow these steps:
1. Press m to select Delete Tests. You see the Delete
menu, such as the following:
System Board
Numeric Coprocessor
System Memory
Diskette Drive A
Hard Disk Drive #l
Serial Port COMl
Serial Port COM2
Parallel Port LPTl
LPTl Printer Test
2. Press m or Ir) to highlight the device you want to
delete and press (Enter. The device is removed from the
Delete menu. You can delete as many devices as you want.
3. When you are finished deleting devices, press It) to select
Execute and see the "Running Tests" section.
Running System Diagnostics
A-3
Advertisement
Table of Contents
