Epson EpsonNet 802.11b User Manual page 48

You want to use a password on your AirPort network.
Because AirPort uses passwords that do not follow the standard for WEP
encryption, you need to change your network password to a hexadecimal
value. Follow these steps:
1. Create a computer-to-computer network without password protection on
the Macintosh that you use to configure the print server.
2. Follow the steps beginning on page 14 to install WP-Admin and establish
a connection to the print server.
3. Make the following selections on the Wireless Server Configuration
screen:
Select
64BIT
In the 64Bit Key 1 box, enter a hexadecimal value consisting of 10
digits, or a combination of digits and letters. Digits can be from 0 to
9, and letters must be between A and F. For example:
If you have an AirPort Base Station, enter a name for your network in
the SSID box. Then change the Wireless Mode to
4. Make any other changes you want to the Wireless Server Configuration
screen and click
click .
QUIT
5. If you want to use the printer in computer-to-computer (ad hoc) mode,
go to step 6.
If you have an AirPort Base Station, do the following:
For Network Name, configure the base station to use the name that
you entered in the SSID box on the Wireless Server Configuration
screen.
For Network Password, select the hexadecimal value that you entered
in the 64Bit Key 1 box, preceded by the number zero (0) and
lowercase letter x. For example:
in the WEP key box.
. When you see the Wireless Server Search window,
OK
0x62B91F2A98
44
62B91F2A98
Infrastructure
. Then go to step 7.
.
.