If Your Macintosh Has A Non-Airport Wireless Adapter - Epson EpsonNet 802.11b User Manual

If Your Macintosh Has a Non-AirPort Wireless
Adapter
Make sure your Macintosh computer's wireless mode is set correctly. Set
it to
Infrastructure
802.11b Ad Hoc
If your adapter does not include an
wireless mode to
adapter uses to communicate without an access point. Do not select a
pseudo ad hoc or proprietary ad hoc mode. See the documentation for
your wireless adapter for details.
If you're using infrastructure mode, make sure there is a link with good
signal strength (greater than 50 percent) between the Macintosh and base
station or access point. See your wireless adapter's documentation for
details.
If you're configuring the print server from a Macintosh with a non-
AirPort wireless adapter, make sure WEP (Wired Equivalent Privacy) is
disabled before you begin. See the documentation for your wireless
adapter for instructions.
if you are connecting through an access point, or
if you are connecting without an access point.
,
Ad Hoc Computer-to-Computer
802.11b Ad Hoc
32
option, set the
, or the mode your