Epson EpsonNet 802.11b User Manual page 27

5. Click . You see a window like the following:
Next
6. In the
Printer Name or IP Address
IP address and click
7. Follow the instructions on the screen to complete the wizard.
8. Click
Close
Properties window.
9. To test the connection, select the
If the test page prints, click
If it fails to print, try the following:
Make sure the printer and print server are connected, plugged in, and
turned on.
Check WP-Admin to make sure you have a signal (see page 16).
Make sure you've entered the correct IP address in step 6.
Make sure you clicked
Now you're ready for wireless printing. For instructions, see the Printer Basics
book that came with your printer.
.
Next
to close the Printer Ports window, then click
OK
Apply
box, enter the print server's name or
tab and click
General
to close the Properties window.
in step 8.
23
Enter your print
server's IP address
or server name
Click Next
on the
Apply
Print Test Page
.