Setting Up The Printer; Getting Started On An Imac - Epson Photo EX User Manual

Setting Up the Printer

If you've been using your EPSON printer with your computer, the printer is
probably set up already. If so, turn it off and disconnect it from the previous
computer. Then go to the section explaining how to connect the cable to your
system.
If you're setting up a new printer, see the documentation that came with your
printer for instructions on unpacking, installing ink cartridges, and loading
paper. Then return to this booklet for instructions on connecting the cable
and installing the printer software.

Getting Started on an iMac

The instructions on the next few pages explain how to connect the USB/
Parallel Adapter cable to your iMac and how to install the printer software
that came on the USB Printer Software CD-ROM.
IMPORTANT:
You can't use the adapter with the printer driver software that came with your
printer. You must use the USB/Parallel Adapter printer driver software.
To use the adapter with the iMac, you must download and install the
iMac Update 1.0 from Apple at http://swupdates.info.apple.com before
you install the USB printer software. Contact Apple Computer if you
have problems installing this update.
8