Epson Photo EX User Manual page 25

Checking your installation
To verify that your USB software installed properly, check the Device
Manager. Click Start, point to Settings, and click Control Panel. Then click
System and click the Device Manager tab.
You should see the device EPSON USB Conversion Cable Devices listed.
Click the + next to the device; you should see EPSON USB Conversion
Cable (EPXUSB1:) listed too.
Note:
If you've installed more than one USB printer device, each new installation
will increase the last digit of the USB conversion cable device name by a
factor of one. For example, a second installed USB printer device would be
listed as EPSON USB Conversion Cable (EPXUSB2:), and a third
installation would be listed as USB Conversion Cable (EPXUSB3).
If the printer doesn't work correctly, uninstall the printer software as
described in your printer documentation. Also uninstall the EPSON USB
printer device software the same way. Then reinstall the USB device and
printer software as described in this guide. If you've installed printer driver
software for the EPSON Stylus COLOR 600, remember to set up your
system to use Windows Print Manager. (See "Setting Up Your System to
Print to the EPSON Stylus COLOR 600" on the next page.)
If you still have problems, contact your EPSON dealer or EPSON technical
support as described in your printer documentation.
26