Figure 55 - Camera Setup Screen; Figure 56 - Camera Ptz Setup Screen - Speco CS16 Operation Instruction Manual

16 channel

Table of Contents

Operation Instruction

Figure 55 — Camera setup screen.

Highlight the PTZ tab, and the PTZ setup screen displays.

Figure 56 — Camera PTZ setup screen.

You can assign IDs to each camera by highlighting the box under the ID heading and pressing the

the number by highlighting it and using the Up and Down arrow buttons to increase and decrease the number. The

PTZ ID number can be set from 0 to 256.

Highlight the Setup... box and press the

Highlight the box in the Product column for the PTZ camera you wish to configure and

press the

button. A list of PTZ devices appears. Select your camera from the list and

press the

button. You will need to connect the camera to the RS232 or RS485 connector

on the back of the DVR following the camera manufacturer's instructions.

button. The Port Setup window appears.

Configure the port's setting based on the PTZ camera manufacturer's instructions.

You can turn the camera number On or Off, and you can

change the Title of each camera using the virtual keyboard.

You can also determine which cameras will display on the

monitors by selecting Normal, Covert 1 or Covert 2 from

a drop-down list in the Use column.

NOTE: When selecting the Covert 1, the DVR displays the

camera title and status icons on the covert video.

When selecting the Covert 2, the DVR displays only

camera title on the covert video.

NOTE:

A user who does not have Covert Camera View

authority cannot view video from cameras set to

Covert 1 or Covert 2 in both the live monitoring

and playback modes.

NOTE: You will only be able to set up PTZ devices if the

PTZ port is set to RS232 or RS485.

button. Change

Table of Contents