Disc Playback; Inserting And Playing A Disc - Epson MovieMate 25 User Manual

Disc Playback

Inserting and playing a disc

1
Press to open the disc tray.
A beep sounds and the power comes on.
You can also press
2
Place the disc in the disc tray with the label
facing up.
3
Press to close the disc tray.
For all discs except
comes on automatically, and projection begins. It
takes a few seconds for the lamp to warm up and
project at full brightness.
To play
back. The projection lamp does not turn on.
You can also press
When a menu is displayed:
See page 19
When using in high altitude areas (above 4,900
feet), set the "High Altitute Mode" to "On." See
page 51 for instructions.
12
on the remote control.
, the projection lamp
, press to start audio play-
on the remote control.
See page 20
See page 21
The display window during
playback
Display window
When playing
Chapter number
When playing
When playing
Track number
When playing
Track number
When playing
Group number
Elapsed playback
time
Track number
Elapsed playback
time
Elapsed playback
time
File number