Half-Rack Size Diversity Tuner (Urx-R1) - Sony UWP-C1 Operating Instructions Manual

Parts Identification
Half-rack size diversity
tuner (URX-R1)
Front panel
Rear panel
1 POWER switch
Turns the power of the tuner ON or
OFF.
2 Antennas a/b
The angle of the antennas can be
adjusted manually.
3 MONITOR connector (phone
jack)
To monitor the tuner output, connect
the headphones to this connector and
adjust the monitor level with the
MONITOR control. Use either stereo
or monaural headphones.
26
4 MONITOR control
Turn to adjust the output monitoring
level (through the headphones).
5 + (+ selection) / – (– selection/
reset) buttons
Press these buttons to set the
reception channel and frequency.
6 Display section
A B
RF
AF
The C channel indication for
U66 model is shown.
A RF (radio frequency) indications
The number of dots indicates the RF
input level.
B AF (audio frequency) indication
Appears whenever the output audio
signal is stronger than the reference
level.
C CH (channel) indication
Shows the reception channel. Each
time you press the SET button, the
channel indication changes as follows.
For details, see "Settings" on page
37.
CH
C