Parts Identification; Body-Pack Transmitter (Utx-B1) - Sony UWP-C1 Operating Instructions Manual

Parts Identification

Parts Identification
Body-pack transmitter
(UTX-B1)
1 Antenna
2 Audio input connector
Connect the supplied lavalier
microphone here.
3 Power indicator
Lights up red when the transmitter is
tuned on.
4 Display section
C
A B
AF RF
CH
E
The E channel indication for
U66 model is shown.
22
D
BATT
H
L
A AF (audio frequency) indication
Appears whenever the input audio
signal is stronger than the reference
level.
B RF (antenna output) indication
Appears during signal transmission
from the antenna.
C RF (antenna output) level
indication
Shows the RF output level setting.
For details, see "Setting the RF output
level" on page 41.
D BATT (battery) indication
Shows the battery condition.
For details, see "Power Supply" on
page 29.
E CH (channel) indication
Shows the transmission channel. Each
time you press the SET button in
transmission mode, the channel
indication changes as follows.
For details, see "Settings" on page
37.
Transmission
channel
Transmission
frequency
Attenuation
level of the
input signal
Accumulated
battery use
time
The channel/frequency indications for
U66 model are shown.
Press
the
SET
button.