Direct Tuning - Sony HT DDW1600 Operating Instructions Manual

In case of poor FM stereo
reception
If the FM stereo reception is poor and "ST"
flashes on the display, select monaural audio
so that the sound will be less distorted.
Press FM MODE repeatedly until the
"MONO" indicator lights up on the display.
To return to stereo mode, press FM MODE
repeatedly until the "MONO" indicator on the
display do not light up.

Direct tuning

Enter the frequency of a station directly by
using the numeric buttons.
VIDEO 1 VIDEO 2 VIDEO 3
SAT TV
2CH A.F.D.
1 2
4 5
3
7 8
>10/
-
0/10
CLEAR
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press D.TUNING.
3
Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Press 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Press 1 b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
DVD
SA-CD/CD TUNER
1
MOVIE MUSIC
AMP MENU
3
AUTO CAL
6
D.TUNING
2
9
D.SKIP
MEMORY DVD MENU
ENTER
4
FM MODE
4
Press ENTER.
You can also use MEMORY/ENTER on
the receiver.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
59 GB