6: Calibrating The Appropriate Settings Automatically (Auto Calibration) - Sony HT DDW1600 Operating Instructions Manual

6: Calibrating the
appropriate settings
automatically
(AUTO CALIBRATION)
This receiver is equipped with D.C.A.C.
(Digital Cinema Auto Calibration)
Technology which allows you to perform
Automatic Calibration as follows:
• Check the connection between each speaker
and the receiver.
• Adjust the speaker level.
• Measure the distance of each speaker to your
listening position.
You can also adjust the speaker levels and
balance manually. For details, see
"7: Adjusting the speaker levels and balance
(TEST TONE)" (page 36).
Before you perform Auto
Calibration
Before you perform Auto Calibration, install
and connect the speakers (page 15, 17).
• The AUTO CAL MIC jack is used for the
supplied optimizer microphone only. Do not
connect other microphones to this jack.
Doing so may damage the receiver and the
microphone.
• During calibration, the sound that comes out
of the speakers is very loud. Pay attention to
the presence of children or to the effect on
your neighborhood.
• Perform Auto Calibration in a quiet
environment to avoid the effect of noise and
to get a more accurate measurement.
• If there are any obstacles in the path between
the optimizer microphone and the speakers,
the calibration cannot be performed
correctly. Remove any obstacles from the
measurement area to avoid measurement
error.
32
GB
Notes
• The Auto Calibration function does not work when
headphones are connected.
• If the Muting function is on when we perform Auto
Calibration, it will turn off automatically.
?/1
MASTER VOLUME
MULTI CHANNEL DECODING
DISPLAY INPUT MODE
TUNING MODE
– TUNING + INPUT SELECTOR
AUTO CAL
AUTO CAL MIC
MEMORY/ SUR BACK X-ROUND
ENTER DIMMER SLEEP 2CH A.F.D. MOVIE MUSIC
DECODING MODE
VIDEO 3 IN/PORTABLE AV IN
PHONES
VIDEO L AUDIO R
1
Connect the supplied optimizer
microphone to the AUTO CAL
MIC jack on the front panel.
2
Set up the optimizer
microphone.
Place the optimizer microphone at your
listening position.You can also use a stool
or tripod so that the optimizer
microphone remains at the same height as
your ears.
Tip
When you face the speaker towards the optimizer
microphone, you will get a more accurate
measurement.
Optimizer microphone
SPEED