Presetting Radio Stations; Direct Tuning - Sony HT-K5 Operating Instructions Manual

Tip
You will not be able to enjoy the stereo effect, but the
sound will be less distorted. To return to stereo mode,
select "FM AUTO" in step 3.

Direct tuning

You can enter the frequency of the station you
want directly.
Use the remote for the operation.
1
Press TUNER repeatedly to select the
FM or AM band.
The last received station is tuned in.
Tip
You can also use the INPUT SELECTOR knob
on the receiver.
2
Press D.TUNING.
3
Press the numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
Press 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Press 1 b 3 b 5 b 0
(You do not have to enter the last "0" when
the tuning scale is set to 10 kHz.)
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
If you cannot tune in a station
and the entered numbers flash
Make sure you have entered the right frequency.
If not, repeat step 3. If the entered numbers still
flash, the frequency is not used in your area.

Presetting radio stations

You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
Presetting radio stations
1
Turn INPUT SELECTOR to select the
FM or AM band.
The last received station is tuned in.
2
Tune in the station that you want to
preset using automatic tuning
(page 18) or direct tuning (page 19).
3
Press MEMORY/ENTER.
"MEMORY" lights up in the display for a
few seconds. Do steps 4 to 5 before the
display goes out.
4
Press TUNING + or TUNING –
repeatedly to select a preset station
number.
Each time you press the button, you can
select the preset station number as follows:
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
If "MEMORY" turns off before you select
the preset station number, start again from
step 3.
Tip
You can also use the remote to select a preset
station number. Press SHIFT repeatedly to select
a memory page (A, B or C) and then press the
numeric buttons to select a preset number.
5
Press MEMORY/ENTER again.
The station is stored to the selected preset
number.
If "MEMORY" turns off before you press
MEMORY/ENTER, start again from step
3.
6
Repeat steps 2 to 5 to preset another
station.
continued
GB
19