Receiving The Crates; Uncrating - GBC Voyager 3 Operation Manual

Operations Manual: Installation

4.2 Receiving the crates

The GBC Voyager 3 is shipped in two crates. Both
crates should arrive at the same time on your
docks.
INFORMATION: ALL SHIPMENTS ARE EX-
WORKS. At our dock, title passes to the
buyer. Please review your insurance cover-
age prior to shipment, as you are responsible
for all subsequent freight charges and risks.
INFORMATION: Before signing the BILL OF
LADING, you should be sure to inspect the
crates and/ or pallets for signs of damage or
missing items; if applicable, make note of
this on the BILL OF LADING.
WARNING: The GBC Voyager 3 Laminator
is a large and heavy piece of equipment. It is
necessary to employ LICENSED RIGGERS
ONLY to move the laminator components.
CAUTION: The GBC Voyager 3 Laminator is
not designed to be tipped up side down or
sideways in any way. Such action disturbs
the exact alignment of the rolling parts of the
machine and may require costly and exten-
sive realignment.
2004 General Binding Corporation

4.3 Uncrating

CAUTION: Do not attempt to remove the
sides of the crate by yourself. You can be
seriously injured and/ or cause damage to
the laminator components.
Below is an example of a typical crated unit. Your
crate may have some minor differences but should
uncrate in the same manner.
CAUTION: Do not use a knife or other sharp
objects to remove shrink wrap or pre mask-
ing from around the laminator. You can
cause irreparable damage to the rollers.
Voyager 3 Voyager 3
Page 4-5