Craftsman C944.414460 Instruction Manual page 7

locale where such regulations exist, you
are legally responsible formaintaining
the operating condition ofthese p arts.
Failure todosoisaviolation ofthe law.
Refer toCUSTOMER RESPONSiBILiTIES
TABLE inthe MAINTENANCE section.
STANDARDS: This saw is listed by
Underwriter's Laboratories, Inc., in ac-
cordance with:
CSA Z62.1-03 Chain Saws - Occupa-
tional Health and Safety
CSA Z62.3-96 Chain Saw Kickback
Occupational Health and Safety
ISWARNING: Before using chain
saw, ensure all fasteners are secure.
CARTON CONTENTS
Check carton contents against the fol-
lowing list.
Model C944,414460
• Chain Saw (fully assembled)
• Chain adjustment tool (bar tool)
• 2-cycle engine oil (bar oil not included)
• Carrying case
Examine parts for damage. Do not use
damaged parts.
If you need assistance or find that parts
are missing or damaged, contact your
Sears Service Centre
NOTE: It is normal to hear the fuel filter
rattle in an empty fuel tank.
Your unit has been factory tested and
the carburetor precisely adjusted. As a
result you may smell gasoline or find a
drop of oil/fuel residue on the muffler
when you unpack the unit.
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.
KNOW YOUR SAW
READ THIS iNSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiadze yourself with the
location of the various controls and adjustments. Save this manual for future ref-
erence.
Chain Aejustment Tool Front Hand Guarc
Bar_ _.
Bar SorocKe[ Muffler.
Hole
Bar Q,
Bumper =ill Cap
Spike
Front Handle
seo
Switch
Q
Starter Housing Fuel Mix Fill Cap
Throttle
Lock-out
Rear
Handle
Cy inder Cove[
Adjushng
Screw
Direction
of Chain
Trave
Throttle
Trigger
!
Choke/Fast
Idle Lever
Chain Brake
Chain BrakeNuts
7
Guide Bar