Entering the memory viewer mode
In case of already SD memory card is inserted into the card slot on the side terminal of the projector
and you want to enter the memory viewer mode again:
1. S elect "Wired" or "Wireless" from the input menu of the projector.
* When you change input between "Wired" and "Wireless", the "Please wait..." message will be
displayed on the screen. After short time, the network connection standby display screen "Ready
for use" will appear.
2. Select "Wired setting" or "Wireless setting" in the projector menu, and press SELECT button.
3. Select "Memory Viewer" with the point ed button and press SELECT button. The "Enter/Exit" pallet
of the memory viewer appears.
4. Select "Enter" and press SELECT button. The memory viewer start-up image appears briefly and an
image stored in the SD memory card is displayed on the screen.
* If the image file is not available in the root directory of the SD memory card, the memory viewer
browser window appears.
Memory viewer
Wireless setting
Wired setting
5