Formatting The Sd Memory Card - Sanyo PLC-XL51 - 2700 Lumens Owner's Manual

* T he data converted by the Network Viewer 5 [File Converter1] can be stored into the SD memory card
mounted on the projector directly. For further information, refer to chapter Network Viewer function,
"Setting of output destination and conversion mode" (p.113) described on the separated Network
Owner's manual for Windows.
* T he program file created by the Program Editor can be stored into the SD memory card mounted on
the projector directly. For further information, refer to chapter Network Viewer function, "Creating a
program file" (p.115) described on the separated Network Owner's manual for Windows.

Formatting the SD memory card

A new SD memory card or a card formatted by computer or camera must be formatted by this product.
Memory Viewer function may not operate properly with a card formatted by other equipment.
* It cannot be formatted when the lock switch of the card is set to "LOCK" position.
1. I n the memory viewer mode, press CANCEL button. The browser window appears on the screen.
2. Press CANCEL button again. The cursor moves to menu item.
3. Select "Format" from "Menu" with the point buttons and press SELECT button. The format
confirmation window appears.
4. Select "Yes" with the point buttons and press SELECT button to start formatting. It takes about 1-2
seconds to complete the formatting.
Note:
✐ During formatting the SD memory card, do not turn off the power or eject the card because the data
in the card might get damaged. During formatting, the SD memory card indicator is blinking.
11