Samsung PN51F5300AF Quick Manual page 14

Issues
No Picture, No Video
The TV will not turn on.
The TV turns off automatically.
There is no picture/video.
Antenna(Air / Cable) Connection
The TV is not receiving all channels.
No Caption on digital channels.
The picture is distorted: macroblock,
error, small block, dots, pixelization.
Others
Purple/green rolling horizontal bars
and buzzing noise from the TV
speakers with Component cable
connection.
Plasma TV is making humming noise.
PF4500_5300-ZC_ENG-US.indd 14
Solutions and Explanations
• Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote
control. If the TV turns on, refer to 'Remote control does not work' below.
• Ensure the Sleep Timer is set to Off in the System menu.
• If your PC is connected to the TV, check your PC's power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When you are watching TV programs from an antenna, the TV will turn off after 10 - 15
minutes if there is no signal.
• Check the cable connections. (Remove and reconnect all cables connected to the TV and
external devices).
• Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device's output is HDMI, it should
be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV's correct source by pressing the
control.
• Reboot the connected device by disconnecting and then reconnecting the device's power
cable.
• Make sure the coaxial cable is connected securely.
• Run Auto Program to add available channels to the channel list. There are 3 options, STD,
HRC and IRC. Most cable systems use STD.
• Verify the antenna is positioned correctly.
• Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.
• Some channels may not have caption data.
• The compression of video contents may cause picture distortion, especially in programs
with fast moving pictures such as sports programs and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this
indicates that the set-top-box has a grounding issue. Replace the Component video cables
with an HDMI connection.
• Plasma TVs typically make a soft humming sound. This is normal. It's caused by the
electrical charges that are used to create the images on the screen.
• If the humming sound is loud, you may have set the brightness on the TV too high. Try
setting the brightness lower.
• You can also have loud humming if the back of your Plasma TV is too close to a wall or
other hard surface. Also try rerouting your connection cables.
• Improper installation of the wall mount can create excessive noise.
English - 14
button on the remote
SOURCE
2013-01-18 1:22:14