Specifications; Features - Craftsman 315.115122 Operator's Manual

SPECIFICATIONS
Motor ................................................................................................................................................................... 19.2 Volt DC
Switch ........................................................................................................................................................ Single Shot Trigger
Staple Speed ..................................................................................................................................................... 40 shots/min.
Staple Size ....................................................... 3/8 in. Crown Width, 1/4 in., 5/16 in, 3/8 in, 1/2 in, 17/32 in, 9/16 in. length
Brad Size ..................................................................................................................... 18 gauge, 3/4 in, 1 in, 1-1/4 in. length
Magazine Capacity ......................................................................................................................................... 100 staple/brad
Charger Input ....................................................................................................................................... 120 V, 60 Hz, AC only
Charge Rate ................................................................................................................................................................. 1 Hour
HANDLE
SWITCH
TRIGGER
DEPTH ADJUS
KNOB
MAGAZINE
"ACTIVATION
FOOT
KNOW YOUR CORDLESS NAILER/STAPLER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating Features and Safety Rules.
SWITCH TRIGGER
The switch trigger is conveniently located under the
handle. Pulling the switch trigger will drive one brad or
staple at a time.
Fig. 1
SAFETY INTERLOCK
The safety interlock prevents the nailer/stapler from
turning on accidentally. Push the activation foot of the
nailer/stapler down flush to the workpiece to disengage
the safety interlock.
DEPTH ADJUSTMENT KNOB
Use the depth adjustment knob to control the depth of the
brad or staple.