Download
Share
Print this page
Craftsman 351.181730 Operator's Manual
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Nail Gun
  5. 351.181730
  6. Operator's manual

Craftsman 351.181730 Operator's Manual

18 gauge 3/8- 13/8" length brad nailer
Hide thumbs

Advertisement

Quick Links

Download this manual
Operator's Manual
18 Gauge
3/8 - 13/8" Length
BRAD NAILER
Model No.
351.181730
CAUTION:
Read and follow
all Safety Rules and Operating
Instructions before First Use
of this Product. Keep this
manual with tool.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears,com/craftsman
20347.01 Draft (04/30/03)
• Safety
• Operation
• Maintenance
• Parts List
• Espahol

Advertisement

loading

Related Manuals for Craftsman 351.181730

Summary of Contents for Craftsman 351.181730

  • Page 1 • Safety all Safety Rules and Operating • Operation Instructions before First Use • Maintenance of this Product. Keep this • Parts List manual with tool. • Espahol Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears,com/craftsman 20347.01 Draft (04/30/03)

  • Page 2: Full One Year Warranty

    The tool must have a male, free-flow hose coupling so that all air pressure is removed from the tool when the coupling joint is disconnected. Failure to use proper coupling could Warranty ......... cause accidental discharge, possibly causing injury. Safety Rules ........Only use air hose that is rated for a maximum working Operation ........

  • Page 3: Specifications

    Moisture will reduce tool performance and life if not DESCRIPTION removed from compressed air. The Craftsman 18 Gauge Brad Nailer drives brads from ¾" to A filter-regulator-lubricator system is required and sbouId be 13/8 " long. OUless design eliminates daily oiling and oil stains located as close to tool as possible.
  • Page 4 NAILING OPERATION Depress latch and slide magazine cover open (see Figure 2). Refer to Figures 5, 6, 7 & 8 (pages 4 and 5). WARNING: Read and follow all safety rules and operating instructions in this manual and on warning label of tool before using this tool.
  • Page 5 LOAD INDICATOR WARNING: All air power fastening tools recoil when operat- ed. This recoil is caused by rapid driving of the fastener. Tool The tool is equipped with a load indicator.The load indicator may bounce from recoil causing a second unwanted fastener (colored red) will be visible through the magazine cover win- to be driven.

  • Page 6: Rebuild Kits

    SAFETY MECHANISM CHECK Inspect contact trip safety mechanism daily for proper opera- tion. Do not operate tool if mechanism is not operating properly. With the red push-button switch in the rapid-fire mode, per- form the following procedures to test safety mechanism: •...
  • Page 7 SYMPTOM POSSIBLE CAUSE(S) CORRECTIVE ACTION Trigger cap leaks air 1. O-ring damaged 1. Check and replace damaged O-ring (Fig. 9, No. 55) 2. Valve stem, seal or O-rings damaged 2. Check and replace damaged stem, seal or O-rings (Fig. 9, Nos. 55, 56, 57 and 60) Cap leaks air 1.
  • Page 8 Model 351.181730 Figure 9 - Replacement Parts Illustration For Nailer...
  • Page 9 PART NO. DESCRIPTION QTY. PART NO. DESCRIPTION QTY. 06395.00 4-0.7 x 22mm Socket Head Bolt 20344.00 Magazine 06086.00 20333.00 4-0.7 x 8mm Socket Head Bolt 20299.00 Push Button 20273.00 Cap Gasket 17437.00 20274.00 Spacer Spring 20275.00 Seal 20246.00 3 x 23ram Spring Pin 20300.00 04210.00 Head Valve Spring...
  • Page 10 Your Home Para pedir servicio de reparaci6n Au Canada pour service en fran£ais: a domicilio, y para ordenar piezas: 1-800-LE-FOYER 1-888-SU-HOGAR (1-800-533-6937) www.sears.ca ® Registered Trademark / Trademark / Service Mark of Sears, Roebuck and Co. ® Marca Registreda / Mama de F_.brica / Marca de Serviciode Sears, Roebuck and Co.