Operation - Craftsman 315.115710 Operator's Manual

UNPACKING
,_
This product has been shipped completely assembled.
[] Carefully remove the hand vac and any accessories
from the box. Make sure that all items listed in the
packing list are included.
[] Inspect the hand vac carefully to make sure no break-
age or damage occurred during shipping.
[] Do not discard the packing material until you have
carefully inspected and satisfactorily operated the hand
vac,
[] If any parts are damaged or missing, please call
1-800-932-3188 for assistance. ,_
PACKING LIST
19.2 V Cordless Hand Vac
Crevice Tool
Brush Attachment
Operator's Manual
WARNING: If any parts are missing do not operate
this hand vac until the missing parts are replaced.
Failure to do so could result in possible serious per-
sonal injury.
WARNING: Do not attempt to modify this hand vac
or create accessories not recommended for use with
this hand vac. Any such alteration or modification
is misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING: To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the hand vac when assembling
parts.
A
WARNING: Do not allow familiarity with tools to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
A
WARNING: Always wear safety goggles or safety
glasses with side shields when operating tools.
Failure to do so could result in objects being thrown
into your eyes, resulting in possible serious injury.
A
WARNING: Do not use any attachments or acces-
sories not recommended by the manufacturer of this
hand vac. The use of attachments or accessories not
recommended can result in serious 3ersonal injury.
APPLICATIONS
You may use this hand vac for the following purposes:
[] Light-duty vacuuming of dry surfaces.
CAUTION: If at any point during the charging
process none of the LEDs are lit, remove the bat-
tery pack from the charger to avoid damaging the
product. DO NOT insert another battery. Return the
charger and battery to your nearest service center
for service or replacement.
LED FUNCTIONS OF CHARGER
LED WILL BE ON TO INDICATE STATUS OF
CHARGER AND BATTERY PACK:
[] Red LED on = Fast charging mode.
[] Green LED on = Fully charged and in maintenance
charge mode.
[] Green LED on = When battery pack is inserted into
charger, indicates hot battery pack or that battery pack
is out of normal temperature range.
[] Yellow and Green LEDs on = Deeply discharged or
defective battery pack.
[] No LED on = Defective charger or battery pack.
CHARGING THE BATTERY PACK
Battery packs for this hand vac are shipped in a low
charge condition to prevent possible problems. Therefore,
you should charge it until the green LED on the front of the
charger comes on.
NOTE: Batteries will not reach full charge the first time
they are charged. Allow several cycles (operation followed
by recharging) for them to become fully charged.