Craftsman 315.115710 Operator's Manual page 11

TO REMOVEBATTERYPACK
See Figure 3.
[] Locate the latches on the side of the battery pack and
depress both sides to release the battery pack from
the hand vac.
BATTERY PACK
ADDING ATTACHMENTS
See Figures 5 - 6.
The brush attachment and crevice tool can be easily snapped
into place on the hand vac.
[] Turn off the vacuum.
[] Insert the attachment into the front end of the vacuum
dust bowl, making sure the attachment is firmly
snapped into place.
LMCHES
Fig. 3
_L WARNING" Battery tools are always in operating
condition. Therefore, switch should always be locked
when not in use or carrying at your side.
ON/OFF SWITCH
See Figure 4.
[] To turn the vacuum on: Slide switch toward the front of
the vacuum.
[] To turn the vacuum off: Slide switch toward the back
of the vacuum.
ON/OFF
SWITCH
TOTURN
ON
TO TURN
OFF
BRUSH
ATTACHMENT
CREVICE TOOL
TO REMOVE
TOREMOVE
Fig. 5
Fig. 6
Fig. 4
11