Assembly; Carton Contents; Tube Assembly; Extension Cord - Craftsman 358.796471 Instruction Manual

CARTON CONTENTS
Model 358.796471
• Edger
• Screws
• Locknuts
Examine parts for damage. Do not use
damaged parts.
NOTE: tf you need assistance or find
that parts are missing or damaged, catt
1-800-235-5878.
ASSEMBLY
A_iI_WARNING: tf received as-
sembled, repeat all steps to ensure
your unit is properly assembled and all
fasteners are secure.
This instruction manuat has been de-
veloped to help you assemble the unit
and to provide its safe operation, tt is
important that you read the entire man-
ual to become familiar with the unit be-
fore you begin assembly.
Read your instruction manual.
Tool8 you will need:
•PhilIips Screwdriver
TUBE ASSEMBLY
• Insert tube into housing as shown.
Align the screw holes.
• Insert Iocknuts into the pockets in the
housing.
• Insert screws through aligned holes.
• Thread screws into Iocknuts; tighten.
Tube _i_X:.Y'X Locknuts
EXTENSION CORD
Use only a 120 A.C. voltage supply as
shown on nameplate of the unit.
The extension cord used to reach the
power source must be:
• Specifically marked as suitable for
outdoor use. The cord must be
marked with the suffix "W-A."
• Heavy enough to carry current from
the power source the full length of the
extension cord to the unit. Otherwise,
toss of power and overheating can oc-
cur causing damage to unit. Refer to
table for minimum wire gauge recom-
mendations. The cord must be
marked with the proper wire gauge.
(Appropriate extension cords are avail-
able.) Do not use multiple cords.
• In good condition. Cord insulation
must be intact with no cracks or
deterioration. Plug connectors must
be undamaged.
MINIMUM WIRE GAUGE
RECOMMENDATIONS
_IVOLTS120 25F31 50FT. 100FE 150FT.12
• American Wire Gauge
Secure extension cord to unit:
• Tie the power plug on the unit to the
extension cord as shown.
• Insert plug into cord socket.
Power Plug on Extension
Cord
DOUBLE iNSULATION CONSTRUCTION
This unit is Double Insulated to help
protect against electric shock. Double
insulation construction consists of two
separate "layers" of electrical insula-
tion instead of grounding.
Tools and appliances built with a
double insulation system are not in-
tended to be grounded. No grounding
means is provided on this unit. nor
should a means of grounding be add-
ed to this unit. As a result, the exten-
sion cord used with your unit can be
plugged into any standard 120 volt
electrical outlet.
Safety precautions must be observed
when operating any electrical tool. The
double insulation system only provides
added protection against injury result-
ing from an internal electrical insulation
failure.