Product View And Parts Identification; Handle Assembly - Craftsman 316.773800 Operator's Manual

CRAFTSMAN 2 YEAR FULL WARRANTY
FOR 2 YEARS from the date of purchase, this product is warranted against any defects in material or workmanship. Defective product will receive free repair or
free replacement if repair is unavailable.
For warranty coverage details to obtain repair or replacement, visit the web site: www.craftsman.com
This warranty covers ONLY defects in material and workmanship. Warranty coverage does NOT include:
• Expendable items that can wear out from normal use within the warranty period, such as edger blades, filters or spark plugs.
Product damage resulting from user attempts at product modification or repair or caused by product accessories.
Repairs necessary because of accident or failure to operate or maintain the product according to all supplied instructions.
Preventive maintenance, or repairs necessary due to improper fuel mixture, contaminated or stale fuel.
This warranty is void if this product is ever used while providing commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
APPLiCATiONS
Edging along paths, driveways, rockeries, etc.
Handle
Throttle Control
On/Off Control
Fuel Cap
Oil Fill Plug
Starter Rope Grip
Spark Plug
Muffler
Air Filter
Cover
Red Cold Weather
Starter Lever
Primer Bulb
Depth Adjustment
Lever
Edger Blade --_
Blade Shield
HANDLE ASSEMBLY
1. Slide the ends of the middle
shaft over the ends of both
lower shafts and align the
holes (Fig. 1).
NOTE: Keep the throttle cable
and wire assembly to the
front of the unit when
assembling the middle
shaft.
2. Insert a flange-headed bolt
Middle Shaft into each of these two holes
(Fig. 2).
3. Install a washer and knob
onto each bolt (Fig. 2).
Tighten the knobs securely.
Lower Washer,_
Shaft
Washer
Bolt
Fig. 1 Fig. 2