Sears F890A5 Operator's Manual page 3

To reinstall the drawer, pry the stop far
enough out to engage the lance (3/16" to
1/4") and push the drawer onto the slides
until the stops pass over the lances.
TO LOCK CHEST:
• Insert the Iockbar (which stores in the top
tray), tabbed end up, into the slot in the
top tray and down into the slot in the
base. Close the cover and lock with the
key.
TO LOCK ROLL-AWAY &
INTERMEDIATE CHEST:
• Insert the Iockbar into the slot in the
base. Move the Iockbar toward the unit
until the bent end fits into the slot near
the lock. Lock with the key. The Iockbar
for the intermediate chest is stored in the
intermediate chests top drawer. The
Iockbar for the roll-away is stored in a slot
in the top front corner of the unit.
TO LOCK TOOL CENTER:
• Insert the slotted end of the Iockbar
through the slot in the top tray and down
into the slot on the panel and in the base.
• The slot in the locking bar fits over the
knob on the panel.
• Close the cover and lock with a padlock.
(Padlock not included).
TO UNLOCK UNITS:
• Reverse the locking procedure.
• For casters, use high quality bearing
grease, (yearly).
• Lubricate the slides, (twice yearly).
• Lubricate lock with graphite, (yearly).
• Periodically the drawer fronts, drawer
trim, and other surfaces should be
cleaned with a mild detergent and water.
• Auto wax will preserve the storage unit's
luster finish. Apply the wax as to a car.
The wax will also help protect the unit
against scratches.
• Grease and oil can be removed with most
standard cleaning fluids. For safety, use a
nonflammable cleaning fluid.
INTENTIONALLY LEFT BLANK