Table of Contents
Advertisement
"LIVE TOOL INDICATOR"
LIGHT (Fig. 13)
Your router also has a "Live Tool Indicator"
green light, located on the motor housing top
cap where the power cord enters the motor
housing. This green light is always on when the
router motor is plugged into a power source.
HEAVY-DUTY
EDGE GUIDE
The router combo
kit comes with a heavy
duty edge guide. This edge guide can be
used as an aid in routing applications
such as
decorative
edging,
straight edge planning and
trimming,
grooving,
dadoing
and slotting.
To attach the edge guide to the fixed or
plunge base, simply insert the edge guide
rods into the edge-guide
mounting
slots
either from the left or the right.
For fix base Tighten the lever on the left
by turning
it clockwise
to secure the edge
guide rod (Fig.14). Tighten the lever on right
by turning
counterclockwise
to secure the
rod (Fig.14).
For plunge base Tighten the lever on the left
by turning
it counterclockwise
to secure the
edge guide rod (Fig.14a). Tighten the lever on
right by turning clockwise
to secure the rod
(Fig.14a)
NOTICE:
If the edge guide lever inner screws
wear down or require calibration:
•
Pull the lever up and turn it clockwise
and
then push the lever down (Fig.15).
Turn the lever counterclockwise
to secure
the edge guide.
Fig. 13
Fig. 14
Fig. 15
27683
ManuaLRevised_11-0120
Page 25
Hide quick links:
Advertisement
Table of Contents
