Table of Contents
Advertisement
A_, WARNING:
Your Router should
never be connected
to the power source
when you are assembling
parts, making adjustments,
installing
or removing
bits, cleaning,
or when it is not in use. Disconnecting
the Router will prevent
accidental
starting,
which could cause serious personal injury.
When unpacking
the box, do not discard any packing
materials
until all of the
contents
are accounted
for:
1. Carefully
lift the router out of the carton and place it on a stable, flat surface.
2.
Open the box to locate the following:
•
Plunge base
•
2 Vacuum
ports: one each for plunge and fixed base
•
1/4-in. collet/nut
(the 1/2-in. collet/nut
is already installed on the router)
•
2 screws for attaching
the vacuum
ports to plunge base
•
Collet/nut
wrench
•
2 Chip shields: one each for the fixed and plunge bases
•
Edge guide
•
Depth-adjustment
wrench
•
Carry case
•
Manual
3.
Inspect the items carefully to make sure that no breakage or damage has
occurred
during shipping.
If any of the items mentioned
is missing, (refer to
"PARTS
LIST" illustration),
return the Router to your nearest Sears store to
have the Router replaced.
_h, WARNING:
If any part is broken or missing, do not attempt
to assemble
the
router, plug in the power cord, or operate the router until the broken or missing
part is replaced.
Failure to do so could result in serious injury.
CARTON
CONTENTS
(Fig.l)
Fixed Base and Router motor with 1/2-in.
Collet/Nut
27683
Manual_Revised_11-0120
Page 10
Hide quick links:
Advertisement
Table of Contents
