Table of Contents
Advertisement
The purpose of safety symbols
is to attract your attention to possible
dangers.
The safety symbols
and the explanations
with them deserve
your careful
attention
and understanding.
The symbol warnings
do not, by themselves,
eliminate
any danger. The instructions
and warnings
they give are no substitutes
for proper accident
prevention
measures.
A_, WARNING:
Be sure to read and understand
all safety instructions
in this
manual, including
all safety alert symbols
such as "DANGER,"
"WARNING,"
and
"CAUTION"
before using this router. Failure to follow all instructions
listed in this
manual may result in electric shock, fire and/or serious personal injury.
SYMBOL
SIGNAL MEANING
_,
SAFETY
ALERT SYMBOL:
Indicates
DANGER,
WARNING,
OR CAUTION.
May be used in conjunction
with other symbols
or pictographs.
DANGER:
Indicates
a hazardous
situation which, if not avoided,
will result
in death or serious injury. This signal word is to be limited to the most extreme
situations
.Always follow the safety precautions
to reduce the risk of fire, electric
shock, and personal injury.
_,
WARNING:
Indicates a hazardous
situation
which, if not avoided,
could
result in death or serious injury. Always follow the safety precautions
to reduce
the risk of fire, electric
shock, and personal injury.
_1, CAUTION:
Indicates
a hazardous
situation
which, if not avoided,
could
result in minor or moderate
injury. It may also be used without
the safety alert
symbol
as an alternative
to "NOTICE ''2 Always follow the safety precautions
to
reduce the risk of fire, electric
shock, and personal injury.
NOTICE:
"NOTICE"
is the preferred
signal word to address
practices
not related
to personal injury. The safety alert symnol
not be used with this signal word. As
an alternative
to "NOTICE",
the word "CAUTION"
without the safety alert symbol
may be used to indicate
amessage
not related to personal injury. 2
Damage
Prevention
and Information
Messages
These inform the user of important
information
and/or instructions
that could
lead to equipment
or other property
damage
if they are not followed.
Each
message
is preceded
by the word "NOTE," as in the example
below:
NOTE: Equipment
and/or property damage
may result if these instructions
are
not followed.
WARNING:
To ensure safety and reliability,
all repairs should
be performed
at a Sears Parts & Repair Service Center.
_1_ WARNING:
The operation
of any power tools can result in
foreign objects
being thrown into your eyes, which can result
in severe eye damage.
Before beginning
power tool operation,
always wear safety goggles or safety glasses with side shield
and a full face shield when needed. We recommend
a Wide
Vision Safety Mask for use over eyeglasses
or standard
safety
glasses with side shields. Always use eye protection
which is
marked to comply with ANSI Z87.1
27683
ManuaLRevised_11-0120
Page 3
Hide quick links:
Advertisement
Table of Contents
