Advertisement
ASSEMBLY
INSTALL
MULCHER
PLATE
(See Figs. 5 and=6)
=
Install two latch hooks to mulcher plate using screw,
washer, lock washer, and weld nut as shown.
NOTE: Pre-assemble
weld nut to latch hook by inserting
weld nut from the top with hook pointing down,
•
Tighte n hardware securely,
.
Raise and hold deflector shield in upright position.
-
Place front of mulcher plate over front of mowerdeck
opening and slide i'nto place, as shown.
•
Hook front latch into hole on front of mower deck.
-
Hook rear latch into hole on back of mower deck.
CAUTION:
Do not remove discharge
guard
from mower.
Raise and hold
guard when attaching
mulcher
plate
and allow it to rest on plate while in
operation.
DEFLECTOR
SHIELD
HOOKS
FIG. 6
TO CONVERT
TO BAGGING
OR
DISCHARGING
Simply remove mulcher plate and store in a safe place.
Your mower is now ready for discharging or installation of
optional grass catcher accessory.
HOOK POINTS
-/_\
DOWN
WELD NUT
/
FROM THE TOP
/
\
LOCK
X
WASHER
SCREW
WASHER
i'_LOCK
WASHER
WASHER
MULCHER
PLATE
_>"'_SCREW
HOOK
_NELD
NUT
F=TG .5
CHECKLIST
BEFORE
YOU OPERATE
AND ENJOY
YOUR NEW
TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE
THE BEST PERFORMANCE AND SATISFACTION
FROM
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING
CHECKLIST:
¢
All assembly instructions have been completed.
¢'
No remaining loose parts in carton.
¢"
Batteryis properly prepared and charged.
(Minimum
1 hour at 6 amps).
¢
Seat is adjusted comfortably and tightened securely.
v"
All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory),
¢"
Be sure mower deck is properly leveled side-to-side/
front-to-rear
for best cutting results.
(Tires must be
properly inflated for leveling).
¢
Check mower and drive belts, Be sure they are routed
properly around pulleys and inside all belt keepers.
,/
Check wiring, See that all connections
are still secure
and wires are properly clamped,
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLLOWING
IMPORTANT
ITEMS:
¢"
Engine oil _sa_ proper level.
,,/_.uef-.$ank=is=f, i lled=wi_h-4resh-_-le_a_,regu.ta,r=ualeaded=-
gasoline.
¢'
Become familiar with all controls
- their location and
function.
Operate them before you starttheengine:.
¢'
Be sure brake system is n safe operating
condition.
Advertisement
