Preparing Your Saw For Use; Introduction; Getting Ready; Carton Contents - Craftsman 358.34110 Operator's Manual

3. IMPORTANT POINTS
a. Secure thetoolcordtotheextension cordas
shown
in Figure 7 tOprevent disconnection.
b. De not abuse cords. Never carry saw by the
p0wercord oryank itto disconnect:Keep toolcord
and extension cordaway from heat, oil, and sharp
edges.
c. Guard against electric shock, Avoid body con-
tact with any grounded conductor,such as metal
pipes and wire fences.
d. Avoid entanglement. Kee; cords clear of
operator, saw chain, and branchesat;all times.
e. Avoid da ngereus situations. Do not expose the
saw to rain, or use in damp, wet, gaseous, or
explosive locations.
f. Inspect extension .cords before each use.
Replace before using the saw if damaged.
PREPARING YOUR SAW FOR USE
g. Inspect chain sewcord before each use. Do not
use the unit with a damaged cord. Take the unit
to a Sears Service Center for repairs.
SECURE TOOL CORD TO
EXTENSION CORD,
Figure 7
SAVE THESEINSTRUCTIONS_
ji ii i i
i, i
• " .... T 11 iiii Jill II I IIHI
A, INTRODUCTION " •
• '_your s aw has been designedwith safety in mindand
includes the following features as standard
equipment:
--- Reduced-KickbackGuide Bar (Lo-Kick _)
Low-Kickback Chain (Xtra-GUARD ®)
Handguard
• _WARNING -
The foUowlng features are included on...yoursaw to
help reduce the hazard of kJckba¢k. However, such
features will not totally eliminate this dangerous reac-
lion. As a chain saw user, do not rely onl_ on safety
devices. You must follow all safety precautions; in_
structlons and maintenance in this manualto help
avoid kickback and othe r forces whichcan result in
serious Injury.
13. GETTING READY
: 1. IREAD YouR OPERATOR'SMANUALCAREFULLY.
-. .Your Operator's Manual has been developed to help
you prepare you_saw for use and to understand its
safe operation. It is important that you read your _ .
manual completely tobecome familar with the unit
• before you begin assembly.
:2..HAVE THE FOLLOWING AVAILABLE:
- a:PmtectiveGIoves. ".........
b. 9/16 inch wrench or'equivalent.
c. Standard Screwdriver.
d. Bar and Chain Oil (see page 9).
C. CARTON CONTENTS
After you unpack the carton:
1. Check the contents against the list below.
2. Examine the items for damage.
3. NotifyyourSearsstoreimmediatelyifapartismfs-
_i_g or damaged.
I KEY NO. CARTON CONTENTS: QTY.
1 Powerhead 1
2 Guide Bar 1
3 Scabbard 1
4 Chain 1
-- Operator's Manual (Not Shown) 1
,