Download Print this page

Craftsman 152.211620 Owner's Manual page 5

8-in wheel variable speed 1/2 horsepower, 1 horsepower (maximum developed) 1725 r.p.m. to 3450 r.p.m. (no load speed)

Advertisement

Available languages

Available languages

THIS TOOL MUST BE GROUNDED WHILE iN USE
TO PROTECT THE OPERATOR FROM ELECTRIC
SHOCK.
mNTHE EVENT OF A MALFUNCTION
OR BREAK-
DOWN, grounding provides the path of bast resistance
for eUectric current and reduces the risk of eUectric
shock, This tooUis equipped with an eUectric cord that
has an equipment grounding conductor and a ground-
ing pUug, The pUugMUST be pUugged into a matching
eUectdcaU receptacb that is properUy installed and ground-
ed in accordance with ALL bcaU codes and ordinances,
DO NOT MODIFY THE PLUG PROVIDED, if it wHU not
fit the eUectricaUreceptacb, have the proper eUectrbaU
receptacle installed by a qualified electrician,
iMPROPER ELECTRICAL
CONNECTION
of the equip-
ment grounding conductor can result in risk of electric
shock, The conductor with the green insulation (with or
without yellow stripes) is the equipment grounding
conductor, DO NOT connect the equipment grounding
conductor to a live terminal if repair or replacement of
the electric cord or plug is necessary,
CHECK with a qualified electrician or sewice personnel
if you do not completely understand the grounding
instructions, or if you are not sure the tool is properly
grounded,
USE ONLY A 3-WIRE EXTENSION CORD THAT HAS
A 3-PRONG GROUNDING PLUG AND A 3-POLE
RECEPTACLE
THAT ACCEPTS THE TOOL'S PLUG.
REPLACE A DAMAGED OR WORN CORD IMMED-
iATELY.
This tool is intended for use on a circuit that has an
electrical receptacle as shown in FIGURE A, FIGURE A
shows a 3-wire electrical plug and electrical receptacle
that has a grounding conductor, if a properly grounded
electrical receptacle is not available, an adapter as
shown in FIGURE B can be used to temporarily con-
nect this plug to a 2-contact ungrounded receptacle,
The adapter has a rigid lug extending from it that MUST
be connected to a permanent earth ground, such as a
properly grounded receptacle box, THIS ADAPTER iS
PROHIBITED IN CANADA.
CAUTION: in all cases, make certain the electrical
receptacle in question is properly grounded, if you are
not sure have a certified electrician check the electrical
receptacle,
This Bench Grinder is for indoor use only, To avoid
serious injury, do not expose to rain or use in damp
locations,
120 Volt
Fig. A
3-prong
electrical receptacle
grounding
conductor
3-wire ebctricaI cord
120 Volt
Fig. B
grounding
conductor
grounding
adapter lug
/
2-prong
electrica!
receptacle
3-wire electrical cord

Advertisement

loading