Fujitsu MAY2036RC Product/Maintenance Manual page 8

Important Alert Items
Task
Installation 2. When dismounting the drive which is mounted on the
system while power is not supplied to it.
• Dismount the drive using the drive mounting/dismounting mechanism,
etc. of the system.
• When storing or transporting the drive, put it in the antistatic bag
(refer to Section 5.1).
Diagnostics Data loss
and
Save data stored on the disk drive to other media before requesting repair.
Maintenance
Fujitsu does not assume responsibility if data is destroyed during servicing
or repair.
Electreical shock
Never touch the HDDs while power-feeding.
Damage
1. Always ground yourself with a wrist strap connected to ground before
handling. ESD (Electrostatics Discharge) may cause the damage to the
device.
2. Never use a conductive cleaner to clean the HDDs.
3. Never remove any labels from the drive or deface them in any way.
4. Never remove the PCA.
5. Never open the disk enclosure for any reason.
Damage
1. Never remove any labels from the drive.
2. Never open the disk enclosure for any reason. Doing so will void any
warranties.
iv
Alert message Page
5-10
6-5
6-5
6-5
6-13
C141-230