Create An Ad-Hoc Wireless Connection - Epson Stylus NX510 Series Network Installation Manual

Create an Ad-Hoc Wireless Connection

Use this setup method if you want to print wirelessly but do not have an access
point or router.
Important:
®
For Windows users: If your computer is connected to a network with an Ethernet
cable, you need to disconnect it before installing software. When setup is complete,
reconnect your computer's Ethernet cable.
®
For Macintosh users: If your computer is connected to a network with an Ethernet
cable, you cannot set up your printer this way. See "Connect Wirelessly Using the
Setup Wizard" on page 4 or "Wired (Ethernet) Installation" on page 22 to set up your
printer.
1. Press the button on the printer's control panel.
Setup
F
2. Press l or r to select , then press .
Network Settings OK
3. Press to select .
OK Wireless LAN Setup
16
Wireless Network Installation