Settings With Switches And Jumpers - Fujitsu Siemens Computers D1740 Technical Manual

Settings with switches and jumpers

Setting via control-panel plug connector
A
B
C
i
Please pay attention on the exact position of the pin pairs!
Skipping system and BIOS Setup password - pinpair A
Pinpair A enables skipping the system and BIOS Setup password.
System and BIOS Setup password are skipped when the device is switched on and
On /
may be changed.
inserted
System and BIOS Setup password must be entered when the device is switched on.
Off /
not inserted
Recovering System BIOS - pinpair B
Pinpair B enables recovery of the old system BIOS after an attempt to update has failed. To restore
the old system BIOS you need a Flash BIOS Diskette (please call our customer service centre).
The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS-
On /
Diskette" restores the System BIOS on the mainboard.
inserted
Normal operation (default setting).
Off /
not inserted
A26361-D1740-Z120-1-6319, Edition: 3
Pin pair A inserted =
Skipping system and BIOS Setup password
1
2
Pin pair B inserted =
System BIOS recovery
1
Pin pair C inserted =
2
factory setting
1
2
Pin assignment of internal ports
English - 15