Ez Mode - Asus SABERTOOTH 990FX User Manual

3.2.1 EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section
Displays the CPU/motherboard temperature,
CPU/5V/3.3V/12V voltage output,
CPU/chassis/power fan speed
UEFI BIOS Utility - EZ Mode
Monday [4/11/2011]
Temperature
CPU +138.2ºF/+60.0ºC
MB +93.2ºF/+34.0ºC
System Performance
Quiet
Performance
Boot Priority
Use the mouse to drag or keyboard to navigate to decide the boot priority.
Selects the boot device priority
Displays the system properties of the
selected mode on the right hand side
•
•
3-2
section 3.7 Boot memu for details.
Selects the display language of
the BIOS setup program
SABERTOOTH P67
BIOS Version : 0121
CPU Type : AMD Phenom(tm) II X4 965 Processor
Total Memory : 1024 MB
Voltage
CPU 1.356V
3.3V 3.288V
Energy Saving
Normal
Power Saving mode
The boot device options vary depending on the devices you installed to the system.
The Boot Menu(F8) button is available only when the boot device is installed to the
system.
Exits the BIOS setup program without saving
the changes, saves the changes and resets
the system, or enters the Advanced Mode
Build Date : 04/11/2011
Speed : 3448 MHz
Fan Speed
5V 5.078V CPU FAN
12V 11.891V CHASSIS FAN
Normal mode
Selects the boot device priority
Clicks to display all fan
speeds if available
Exit/Advanced Mode
English
4245RPM CPU OPT FAN
N/A CHASSIS FAN2
Boot Menu(F8) Default(F5)
Loads optimized default
ASUS Optimal mode
Chapter 3: BIOS setup
N/A
N/A