Choose Your Connection; Usb Connection - Epson Stylus 411638300 Quick Start Manual

6

Choose your connection

Network (wireless or wired)
See your
Guide.
software as described below.
OR

USB connection

Make sure you have a USB cable (not included).
Then follow the steps below.
USB connection
Follow these steps to connect the NX510 Series directly to your computer using
a USB cable (not included).
Windows
®
1
Make sure the NX510 Series is NOT CONNECTED to your computer.
Note:
If you see a Found New Hardware screen, click
the USB cable. You can't install your software that way.
2
Insert the NX510 Series software CD.
With Windows Vista
window, click Run Setup.exe. When you see the
User Account Control screen, click Continue.
3
Click Install and follow the on-screen instructions.
4
When you see this screen, select Install driver for direct USB
connection and then click Next.
Network Installation
You can't install your
, if you see the AutoPlay
®
Cancel
and disconnect