Advertisement
•
Remove
adjusting
keys or wrenches
before
turning
the tool on. A wrench or a key that is left
attached to a rotating part of the tool may result in
personal injury.
•
Do not overreach.
Keep proper
footing
and
balance
at all times.
Proper footing
and balance
enables better control of the tool in unexpected
situations.
•
Use safety equipment.
Always
wear eye pro-
tection.
Dust mask, nonskid safety shoes,
hard
hat, or hearing
protection
must be used for
appropriate
conditions.
Tool Use and Care
•
Use clamps
or other practical
way to secure
and support
the workpiece
to a stable plat-
form.
Holding the work by hand or against your
body is unstable
and may lead to loss of control.
•
Do not force tool. Use the correct
tool for your
application.
The correct tool will do the job better
and safer at the rate for which it is designed.
•
Do not use tool if switch does not turn it on or
off. Any tool that cannot be controlled with the
switch
is dangerous
and must be repaired.
•
Disconnect
the plug from the power source
before
making
any adjustments,
changing
accessories,
or storing
the tool. Such preven-
tive safety measures
reduce
risk of starting the
tool accidentally.
Store
idle tools out of reach of children
and
other untrained
persons.
Tools are dangerous
in the hands of untrained
users.
Maintain
tools with care. Keep cutting tools
sharp and clean. Properly
maintained
tools, with
sharp cutting
edges are less likely to bind and are
easier to control.
•
Check for misalignment
or binding
of moving
parts, breakage
of parts, and any other condi-
tion that may affect the tools operation.
If
damaged,
have the tool serviced
before
using.
Many accidents
are caused by poorly maintained
tools.
Use only accessories
that are recommended
by the manufacturer
for your model. Accesso-
ries that may be suitable
for one tool, may be-
come hazardous
when used on another
tool.
SERVICE
•
Tool service
must be performed
only by
qualified
repair personnel.
Service or mainte-
nance performed
by unqualified personnel could
result in a risk of injury.
•
When
servicing
a tool, use only identical
replacement
parts. Follow
instructions
in
Maintenance
section
of this manual.
Use of
unauthorized
parts or failure to follow Mainte-
nance Instructions may create a risk of electric
shock or injury.
Advertisement
