Advertisement
TABLE OF CONTENTS
•
General Safety Rules .................................................................................................................................................
2-3
•
Specific Safety Rules/Symbols
..................................................................................................................................
3-5
•
Features .....................................................................................................................................................................
5-6
•
Assembly ....................................................................................................................................................................
7-9
•
Operation ..................................................................................................................................................................
9-10
•
Maintenance ................................................................................................................................................................
11
•
Accessories .................................................................................................................................................................
11
•
Exploded View And Repair Parts List ....................................................................................................................
14-15
•
Parts Ordering / Service ..............................................................................................................................................
16
WARNING:
Read and understand
all instruc-
tions. Failure
to follow all instructions
listed
below, may result in.electric
shock, fire and/or
serious
personal
injury.
SAVE THESE
INSTRUCTIONS
Work Area
•
Keep your work area clean and well lit. Clut-
tered benches
and dark areas invite accidents.
•
Do not operate
power tools in explosive
atmospheres,
such as in the presence
of
flammable
liquids,
gases,
or dust.
Power tools
create sparks which may ignite the dust or fumes.
•
Keep bystanders,
children,
and visitors
away
while operating
a power
tool. Distractions can
cause you to lose control.
Electrical
Safety
•
Double
insulated
tools
are equipped
with a
polarized
plug (one blade
is wider
than the
other.)
This plug will fit in a polarized
outlet
only
one way. If the plug does
not fit fully
in
the outlet,
reverse
the plug. If it still does
not
fit, contact
a qualified
electrician
to install
a
polarized
outlet.
Do not change
the plug in
any way. Double
insulation
[]
eliminates
the
need for the three wire grounded
power cord and
grounded
power supply system.
•
Avoid body contact
with grounded
surfaces
such as pipes, radiators,
ranges
and refrigera-
tors. There
is an increased
risk of electric
shock
if your body is grounded.
•
Don't expose
power tools to rain or wet condi-
tions. Water entering
a power tool will increase
the risk of electric shock.
•
Do not abuse the cord. Never use the cord to
carry the tools or pull the plug from an outlet.
Keep cord away from
heat, oil, sharp
edges or
moving
parts. Replace
damaged
cords imme-
diately.
Damaged
cords increase the risk of
electric shock.
•
When operating
a power tool outside,
use an
outdoor
extension
cord marked
"W-A"
or "W".
These cords are rated for outdoor use and reduce
the risk of electric shock.
Personal
Safety
•
Stay alert, watch
what you are doing and use
common
sense
when operating
a power tool.
Do not use tool while tired or under the influ-
ence of drugs,
alcohol,
or medication.
A
moment
of inattention while operating
power tools
may result in serious
personal
injury.
•
Dress properly.
Do not wear loose clothing
or
jewelry.
Contain
long hair. Keep your hair,
clothing,
and gloves
away from
moving
parts.
Loose clothes, jewelry, or long hair can be caught
in moving parts.
•
Avoid accidental
starting.
Be sure switch
is
off before
plugging
in. Carrying
tools with your
finger on the switch or plugging
in tools that have
the switch on invites
accidents.
Advertisement
