Advertisement
WARNING: A lways w ear s afety goggles o r
safety
glasses with side shields when operatingtools.
Failure to do so could resultin objectsbeing thrown
Into your eyes, resultingin possible serious injury.
SWITCH
See _gure 2.
To turn your ddll ON, depress the switch tdgger. To turn it
OFF, release the switch tdgger.
VARIABLE SPEED
This tool has a vadable speed switch that delivers higher
speed and torquewith increasedtdggerpressure. Speed is
controlledby the amount of switchtdgger depression,
Note: You might hear a whistling or dnging noisefrom the
switchduring use, Do not be concerned,this is a normal
part of the switchfunction,
TO INSTALL BATrERY
PACK
•
Lock switchtrigger on your drill by placingthe direction
of rotationselector in center position.Sea F7#u/e4.
• Place battery peck in your ddU.Align raisedrib on
battery pack with groove inside ddlL Sac F/gura 3.
t
BATI'ERY
PACK
DEPRESS LATCHES TO
RELEASE BATTERY PACK
LATCHES
Fig. 3
• Make sure the latches on each side of your battery
pack snap in place and battery pack is secured in drill
before beginningoperation.
CAUTION: When placingbattery pack in your drill,
be sure raised fib on battery pack aligns with groove
Insideddll and latches snap Imo place pmpedy.
Improperassembly of battery pack can c_use
damage to intemat components.
TO REMOVE BA'R'ERY
PACK
•
Lock switch trigger on your drillby placingthe direction
of rotationselector in senter position. Sae r"Tgu/e4.
•
Locate latches on end of battery pack and depress to
release battery pack from yourddll. See F_jure 3.
•
Remove battery pack from yourdrill.
Advertisement
