Samsung LED 7450 E-Manual page 64

Hide thumbs Also See for LED 7450:
Table of Contents

Advertisement

For the $9 models
Plug the cable into the One Connect
IR connector
and then point the transmitter
at the other end of
the cable towards
the external
device's
remote
panel receiver. However, there can' be any obstacles
between
the IR extension
cable and the external
device.
The presence
of an obstacle
will interfere
with
the transmission
of the remote
panel signal.
The coot
and design
of the IR Extender
may vary depending
on the modet,
Add the External
Device
o
o
Turn on the external
device you wish to set up universal
remote
function
for and then press the
SOURCE button
to bring up the Source
screen.
Select Universal
Remote
Setup from the top of the screen.
This initiates
the universal
remote
setup process.
Follow
the on-screen
instruction
and set up the universal
remote
control.
If it does not work, set
up the remote
control
by entering
the model
number
manually.
Using
the Universal
Remote
Control
By configuring
the universal
remote
control
feature
for a connector
to which
an external
device is
already
connected,
you can use the Smart Touch Control
as a universal
remote
control
simply
by
sending
the input signals
to the corresponding
connector.
Registered
External
Device
Management
Universal
Remote
Setup
screen,
select a registered
external
device.
o
Source
Setup:
Change the TV's input connector
that the external
device
is connected
to.
o
Synced
Power
off: Configure
the external
device to turn off when the TV is turned
off.
o
Rename:
Rename the registered
external
device (up to 15 characters
long).
o
Delete:
Remove the registered
external
device.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents