Changing Your Internet Settings Manually - NETGEAR WGT624 Reference Manual

To use the Smart Setup Wizard:
1. Connect to the wireless router by typing http://www.routerlogin.net in the address field of
your browser, then click Enter.
2. For security reasons, the router has its own user name and password. When prompted, enter
admin for the router user name and password for the router password, both in lowercase
letters. To change the password, see
Note: The router user name and password are not the same as any user name or
password you may use to log in to your Internet connection.
Once you have entered your user name and password, your Web browser should find the
WGT624 v4 wireless router and display the home page as shown in
3. Click Setup Wizard on the upper left of the main menu.
4. Click Next to proceed. Input your ISP settings, as needed.
5. At the end of the Setup Wizard, click the Test button to verify your Internet connection. If you
have trouble connecting to the Internet, see

Changing Your Internet Settings Manually

Note: If you are setting up the router for the first time, the default settings may work for
you with no changes.
To change your Internet settings manually:
1. Log in to the router at its default LAN address of http://www.routerlogin.net with its default
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
Connecting the Router to the Internet
108 Mbps Wireless Router WGT624 v4 Reference Manual
"Changing the Administrator Password" on page
Chapter 6, "Troubleshooting".
v1.2, July 2007
4-6.
Figure 1-11 on page 1-11.
1-13