NETGEAR WGT624 Reference Manual page 41

3. In the Security Options section, select WEP. The WEP options display.
Figure 2-3
4. Select the Authentication Type.
The default setting is Automatic, which usually works. If it does not, select Open System or
Shared Key. Check your wireless card's documentation to see which method to use.
Note: 64-bit WEP encryption strength is sometimes referred to as 40-bit encryption.
5. From the Security Encryption drop-down list, select the WEP encryption strength.
Wireless Settings and Security
108 Mbps Wireless Router WGT624 v4 Reference Manual
v1.2, July 2007
2-9