Front Panel Overview - Alesis MultiMix8Line Quick Start Manual

FRONT PANEL OVERVIEW

1.
2.
3.
4.
5.
6.
7.
8.
VOLUME
Adjust the gain for each channel
PAN
Adjust the signal's position in the left-right panorama.
connections, this knob acts as a BALANCE control, attenuating the left side
of the signal as the knob is moved rightwards, and vice versa.
SEND
Adjust the amount of signal sent to an external effects processor. SEND is
"post-fader," which means that the amount of signal you send to the external
processor will be affected by the VOLUME setting for the channel.
SIGNAL/CLIP LED
When normal signal levels are detected, this LED glows green. To minimize
distortion, turn down your input source if the LED flashes RED (clip).
MIC/LINE
For the first channel, switch between a MICROPHONE input or the LINE
inputs on the rear of the unit.
EFFECTS RETURN
Adjust the amount of signal sent back to the mixer from an external effects
processor.
MASTER
Adjust the output volume sent to the MAIN OUTPUTS.
MASTER LEVEL METERS
Watch the master level meters for optimal signal level. The MultiMix8Line's
meters indicate 0dB at 0dBu.
4
For stereo