Freescale Semiconductor TWR-MCF52259-Ethenet User Manual page 32

HTTP - HyperText Transport Protocol
Used to transport HTML (web pages)
•
POP3 - Post Office Protocol
Used to "pull" email from a server
•
TFTP - Trivial File Transfer protocol
Used to transfer blocks of data
•
UDP - User Datagram Protocol
Used to transfer data without a connection
•
Provides 65535 multiplexed ports per IP address
•
PPP - Point to Point Protocol
used to establish a direct connection between two nodes
•
DHCP - Dynamic Host Configuration Protocol
Used to dynamically configure a device on a network
•
BOOTP – Bootstrap Protocol
Another much simpler method of dynamically configuring a device on a network
•
DNS – Dynamic Name System
A client/server based system to translate host/domain names or URL's to IP addresses.
•
ARP – Address Resolution Protocol
A lower level protocol required to match IP addresses and Ethernet MAC addresses
•
Freescale Semiconductor Confidential and Proprietary Information. Freescale™ and the Freescale logo are trademarks
of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006.
Other Protocols in the Internet Protocol Suite
- Supported via Interniche
- Supported via Interniche
- Supported by Freescale Web Server
- Supported by ColdFire Lite stack
- Supported via Interniche
- Supported by ColdFire Lite stack
- Supported by ColdFire Lite stack
- Supported by ColdFire Lite stack
31
TM