Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Freescale Semiconductor Manuals
  4. Network Router
  5. T1023WLAN
  6. Getting started manual

Freescale Semiconductor T1023WLAN Getting Started Manual

Wi-fi wave2 access point router
Hide thumbs

Advertisement

Quick Links

Download this manual
Freescale Semiconductor
Getting Started Guide
T1023WLAN Wi-Fi Wave2 Access
Point Router Getting Started Guide

1 Introduction

This document explains the T1023 hardware board interface.
It also explains the steps required to configure the 802.11AC
Wave2 Wi-Fi using the command line interface. You can also
enable the 802.11AC Wave2 Wi-Fi card on a T1023 board.
This document includes the following sections:
•

T1023 board interface

•
Preparing T1023 board
•
Configure 802.11AC Wave2 Wi-Fi using command line
interface
•
Enable 802.11ac Wave2 Wi-Fi card on T1023 board
•
Troubleshoot 802.11ac Wave2 Wi-Fi connection
2 T1023 board interface
This section displays the overview of the T1023 board. The
following figure shows the top enclosure view of the T1023
board with the LEDs.
© 2015 Freescale Semiconductor, Inc.
Document Number: T1023WLANAPGS
Contents
1
Introduction................................................................1
2
T1023 board interface........................ .......................1
3
Preparing T1023 board.................... ..........................3
4
command line interface.............................. ...............4
5
T1023 board............................................... ............... 6
6
connection................................................ ................. 7
7
Revision history.......................... .............................. 8
Rev. 0, 09/2015

Advertisement

loading

Related Manuals for Freescale Semiconductor T1023WLAN

Summary of Contents for Freescale Semiconductor T1023WLAN

  • Page 1: Table Of Contents

    Freescale Semiconductor Document Number: T1023WLANAPGS Getting Started Guide Rev. 0, 09/2015 T1023WLAN Wi-Fi Wave2 Access Point Router Getting Started Guide Contents 1 Introduction Introduction..............1 T1023 board interface..........1 This document explains the T1023 hardware board interface. Preparing T1023 board..........3 It also explains the steps required to configure the 802.11AC...
  • Page 2 The following figure shows the top view of T1023 board. Two Wi-Fi cards are mounted on the three PCIe slots. Each Wi-Fi card is mounted with a black heatsink to avoid heat dissipation. T1023WLAN Wi-Fi Wave2 Access Point Router Getting Started Guide, Rev. 0, 09/2015 Freescale Semiconductor, Inc.

  • Page 3: Preparing T1023 Board

    Follow the steps given below to prepare the T1023 board. 1. Attach the RS-232 serial cable between the T1023 board UART0 port and serial port of the host computer. T1023WLAN Wi-Fi Wave2 Access Point Router Getting Started Guide, Rev. 0, 09/2015 Freescale Semiconductor, Inc.

  • Page 4: Configure 802.11Ac Wave2 Wi-Fi Using Command Line Interface

    # need about 20secs for auto-negotiation sleep 20 # data = 0x9 means speed is 2.5G mdio read FM1@TGEC1 7.0xc800 2. Use TFTP server or USB to Boot the Kernel T1023WLAN Wi-Fi Wave2 Access Point Router Getting Started Guide, Rev. 0, 09/2015 Freescale Semiconductor, Inc.
  • Page 5 Set the bridge connection Use the following script to set up the bridge connection. brctl addbr br0 brctl addif br0 ath0 brctl addif br0 fm1-mac4 ifconfig fm1-mac4 up T1023WLAN Wi-Fi Wave2 Access Point Router Getting Started Guide, Rev. 0, 09/2015 Freescale Semiconductor, Inc.

  • Page 6: Enable 802.11Ac Wave2 Wi-Fi Card On T1023 Board

    The following figure shows how to use the 8 x RF cables connected to the dual 4x4 AC cards and to two 4x4 STAs. Connect the attenuators. It also illustrates how one U.FL/IPEX to SMA converter cable and one SMA cable is connected to a single antenna port. T1023WLAN Wi-Fi Wave2 Access Point Router Getting Started Guide, Rev. 0, 09/2015 Freescale Semiconductor, Inc.

  • Page 7: Troubleshoot 802.11Ac Wave2 Wi-Fi Connection

    3. Use the following command to check if the STA is connected to the wireless card of the access point: wlanconfig ath0 list sta 4. If required, reboot the system to check performance. T1023WLAN Wi-Fi Wave2 Access Point Router Getting Started Guide, Rev. 0, 09/2015 Freescale Semiconductor, Inc.

  • Page 8: Revision History

    7 Revision history This table summarizes revisions to this document. Table 1. Revision history Revision Date Topic cross-reference Change description Rev 0 09/2015 Initial Public Release T1023WLAN Wi-Fi Wave2 Access Point Router Getting Started Guide, Rev. 0, 09/2015 Freescale Semiconductor, Inc.
  • Page 9 Freescale, the Freescale logo, AltiVec, CodeWarrior, PowerQUICC and QorIQ are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm Off. CoreNet is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners.

  • Page 10: Federal Communication Commission Interference Statement

    Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.