Freescale Semiconductor TWR-MCF52259-Ethenet User Manual page 160

LAB3 – MSD(HOST)
• In this LAB will achieve reading and writing to thumb drive. This will
demonstrate the Host functionality.
• Open the Lab from the Installed folder.
• D:\Profiles\r63554\Desktop\USB for MCF52259\usb-
host\projects\CodeWarrior\mcf52223\mass-storage
• Follow the same steps followed in LAB2 for flash programming.
• Connect the serial cable to system,
• Open the Hyper terminal, select the COM1 and do the Baud rate setting -
115200.
•
TM