Freecom Media Player II User Manual page 24

Freecom MediaPlayer II
Changing Audio Settings
EN
Night Mode

Digital output
Changing Video Settings
Screen Ratio
Brightness
Contrast
TV System
Changing HDMI settings
Connect the HDMI cable before usage, adjust TV mode to HDMI, then video appears on
TV screen. Please refer to "Changing Audio Settings" and "Changing Video Settings" if
you want to change HDMI settings.
4
"On" "Off" and "Comfort mode" are available
In comfort mode, the volume is restricted automatically so that
it would not affect other people from rest or working.
The following options are available:
- HDMI LPCM
- HDMI RAW
- SPDIF LPCM
- SPDIF RAW
- Pan Scan 4:3 Displays a wide picture on the entire screen
and cuts off the redundant portions when a standard 4:3
TV is connected.
- Letter Box 4:3 Displays a wide picture with two black borders
on top and bottom of 4:3 screen when a standard 4:3 TV is
connected.
- 16:9 Compresses the image to convert the whole image
when a 16:9 TV is connected.
Select to set brightness level.
Select to set contrast level.
Select to adjust TV system.