Freecom Media Player II User Manual page 19

External multimedia hard drive / 3.5" / lan / usb 2.0 / av

Hide thumbs Also See for Media Player II:

Table of Contents

Follow the instructions as shown in the above picture and connect the device to PC.

Power on the PC and enter the system. The PC detects the device automatically and then

the device can be used as an external USB storage device. After data transfer is finished,

please remove the USB storage device safely (click the USB device icon to stop the USB

device and then pull out the USB cable).

Notes:

1. Please don't power off when the device is busy (reading/writing data).

. If there is no USB detected after connecting the USB cable to the PC pull

off the USB cable, wait about 10 seconds and then connect it again.

Basic operation

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the Media Player II and is the answer not in the manual?

Mediaplayer ii